Brand new aftermarket Stator + Mosfet Regulator Kit
- Direct
replacement to your original unit
- Plug-and-play, direct fit, easy
installation
- All shipped products are tested
*All item
pictures are accurate, if in doubt, do not hesitate and compare our item to
your original part.
Brand new aftermarket Stator
- Highest
grade of lamination materials
- Highest grade of copper winding,
resistant to 200 degrees Celsius
- Connectors included
- Rubber
grommet included
Brand new Mosfet Voltage Regulator
Rectifier
STOP BURNING YOUR REGULATOR RECTIFIER!
It is time to
update or replace your voltage regulator with the advanced MOSFET
type. It runs cooler than all OEM diode style regulators. In addition,
this rectifier has to overheat protection, rather than burn up it will
simply turn off for a while and cool off.
- The quality exceeds
the OEM equipment
- Improved heat sink and charging
capabilities
- Higher grade of electric components
We
have even included the opposite connector (main harness side) as we know
these are often melted/corroded/defective and a major cause for repetitive
electrical issues.
Please Note: There are 2 possible stators for the
Triumph Speed Triple 1050 2005-2010, compare the dimensions of your
original product with the dimensions of our product before buying. This
stator will fit engine serial number 356143 and up. The other possible
product is
RM01391S.
STATOR
Dimensions:
- Interi
or diameter: 42mm
- Exterior diameter: 115mm
- Thickness:
22mm
- Length of wires stator to grommet: 110mm
- Length of
wires grommet to plug: 600mm
Other
Specifications:
- Number of wires: 3
- Number of plugs:
1
- Number of pins: 3
- Number of poles: 18
Wire to
wire resistance:
- Alternator 3p: Between each Black = 0.5 ohms
+-20%
REGULATOR
Dimensions:
- Width: 90mm
- Length:
94mm
- Height: 30mm
- Wires length: 320mm &
235mm
- Fixation holes centre to centre: 75mm
Other
Specifications:
- Number of plugs: 2
- Number of pins:
7
- Number of wires: 7
- Minimum Charging Voltage: 14.5 V +-
0.5 V
- Maximum Charging Current: 50 A / 500 W
- Open Circuit
Voltage: < 15 V
- Operation Temperature: -20° to
85°
Please Note:
- All electrical components must
be fitted by a qualified technician.
- Before fitting electrical
components ensure the root cause of the original failure has been
addressed.
- The absence of either of points 1 or 2 above, will void
any warranty.
