Liquid Gaskets are liquid sealants used for sealing inner fluids by
applying them to the joint surfaces of various flanges, screws
etc. Highly reliable sealing is achieved by filling in and adhering to
the minute clearance on the joint surface. As they are a liquid when
applied, so metal joint surfaces touch each other, and there is almost no
decrease in surface pressure due to vibration. Therefore, they are durable
and have excellent sealability. Products with various material bases are
available including synthetic resin-based, synthetic rubber-based,
acrylate-based, acrylic emulsion-based, and silicone-based. There are also
various reaction system grades including solvent vaporization, anaerobic
curing, and moisture-curing.
Products include general-purpose
types, and products for FIPG and CIPG.
FIPG: Formed In Place Gasket
Liquid gasket that is applied on one surface and forms a seal by reactive
curing after joining the other surface.
CIPG: Cured In Place Gasket
Liquid gasket that is applied on one surface as a bead and forms a seal by
curing before joining the other surface (sealing by surface pressure of the
joint surface).
TB1215 is an oxime type single-component,
moisture-curing, silicone-based liquid gasket. It has relatively low
viscosity, so it is easy to apply. It has excellent chemical resistance and
can be used as a FIPG for engine oil pans and gear cases, etc., in addition
to general-purpose sealing applications
- Main component:
Silicone
- Curing method: Solvent
Vaporisation Oxime
- For General Use
- Chemical
Resistance
- Appearance: Grey
- Viscosity: 85
Pa-s
- Apparent viscosity (SOD): 20 Pa-s
- Specific
gravity: 1.50
- Tack free time: 10 minutes
- Hardness:
A50
- Elongation rate: 320%
- Tensile strength: 1.2
MPa
- Tensile shear bond strength (Iron): 0.9 MPa
- Tensile
shear bond strength (Aluminium): 0.8 MPa
